Go Back

Try These Plumbing Maintenance Tips From the Pros and Prevent Leaks in Your Home

Plumbing Maintenance

You are probably aware that you need to stay on top of your plumbing to help avoid water leaks, but do you know what that means exactly? Rest easy, our team of pros are more than happy to share their tips with you. This is what we suggest:

Lower Water Pressure

Low Water PressureIt’s a healthy habit to take your blood pressure regularly to make sure all is well. That is exactly what you need to do with your water pressure.

Just like with your blood pressure, if your water pressure is too high, it could be doing damage to what is around it (in this case the pipes).

The force of the water places a lot of strain on your plumbing and will eventually cause leaks to form. This is an easy fix. Simply test your water pressure. If it is too high (i.e. above 60 psi) call your local Penrith, NSW plumber to install a water pressure regulator.

Deal With Clogs the Right Way

Chemical Clog RemoverWhen you’ve got a clogged drain, time is of the essence to get it cleared up. If you’ve had to deal with a clog, you know how inconvenient and messy that they can be.

It can be tempting to reach for a commercial clog remover. Don’t make that mistake. Commercial clog removers are full of hydrochloric acid, which can cause substantial damage and leaks in your pipes.

Focus instead on trying to avoid clogs in the first place. Don’t put anything down the drain that doesn’t belong there, like sanitary napkins, paper towels or food matter.

How to Find Leaks

Identify a LeakYour best bet to minimizing water damage from leaks is to discover them before they get too big. What does a leak look like?

Signs of water and moisture on pipes obviously signal that there is a leak, but there are other things to look for, like discoloration on the flooring and walls or mold growth.

There can be leaks behind your walls too. Turn your water off inside and then check your water meter. Wait a couple of hours and if the reading is different, then you’ve got a leak brewing.

Pipe CorrosionCorrosion Avoidance

Your pipes are vulnerable to corrosion and leaks when they come into contact with high levels of minerals.

You can delay this process by testing your water’s PH levels and correcting them with a water softener.

It can be wise to change your copper pipes to PVC too, because they are more resistant to rust.

Don’t think that a small leak is innocent. If you don’t deal with it today, you could be dealing with more serious damage tomorrow.